Learning About Paving Contractor Services

Hello, my name is Rick. Welcome to my website about paving contractor services. When I purchased my commercial site, I had to immediately renovate the driveway and walkways to suit them to my needs. I contacted a paving contractor to discuss the paving options available for the job at hand. I was overwhelmed with all of the available materials and build techniques for my paving project. I finally settled on the best one for my place of business with help from my paving contractor. I will explore paving options and build techniques on my site to help other people find the perfect combination for their project. Thanks.

4 Mistakes To Avoid When Patching Holes In Asphalt

Blog

Asphalt is a great material to use in driveways, parking lots, and walkways alike. Not only is it affordable, but it is also among one of the most durable options. Still, it is inevitable that even the highest quality asphalt will develop holes and cracks over time. The good news is that these can usually be patched. Before you take on any asphalt patching project, however, there are some common mistakes you'll want to avoid.

Failing to Remove Loose Debris

Asphalt patches will conform to the shape that you pour them into, which is why it's so important to remove all loose debris and create square edges as much as possible before patching. Otherwise, as the debris shift and crumble, the patch itself will move and crack/crumble as well. For holes in asphalt, use a shovel or other tools to make the hole resemble a square shape as much as possible. Then, be sure to scoop out any remaining asphalt debris before pouring for best results.

Forgetting to Compact the Base

Another important step to take before pouring an asphalt patch is to compact the base of the crack or hole as much as possible. This could be done with a steel tamper, which will flatten and level out the exposed ground. After tamping, the surface should be nearly solid. If not, then you may need to pour and compact a layer of crushed stone or sand into the hole and tamp it again before pouring your patch.

Sealing the Asphalt Patch

One of the most common mistakes people make when patching their own asphalt is sealing the new asphalt shortly after it is poured. Unfortunately, this will prevent the asphalt from properly curing, which will make it more prone to damage in the future. Instead, it is advised that you wait at least a few weeks after patching to apply any sealant to the asphalt.

Not Knowing When to Call a Pro

Finally, understand that not all asphalt patching projects are advisable as DIY projects. For large holes or cracks that are not uniform in their shape or size, or for particularly deep holes, it will be in your best interest to contact an asphalt patching professional to ensure that the job is done correctly. This will ensure that you don't end up with additional cracks or damage and that you make the best use of your hard-earned money.

Share

9 June 2017